Materials Day 2009 at MIT

Today I skipped a music class and XC practice to go to a day long Materials Day symposium at MIT. It consisted of the following presentations:

1: "New materials for PV modules: Cost, Performance and Reliability" - Let my preface my reaction to this talk by saying that I believe that I do not have a future in photovoltaics. I find it not very interesting, and not related to materials science in ways I find interesting. Thus, I didn't find this talk very exciting, and, being the first of the day, it may have been all I could do to stay awake.

2: "Nanostructured Heat Transfer and Energy Conversion Materials" -This presentation was probably my favorite. I was wide awake for all of this. It described a certain system consisting of a p-type semiconductor and an n-type semiconductor, each attached to two different plates. Then, if you create a temperature gradient between the plates, it creates an electrical current. Conversely, if you put a current through the semiconductors, you can create a temperature gradient! So this talk was all about this technology and the search for a material with high electrical conductivity and low thermal conductivity, and various methods for achieving and optimizing this.

3: "Progress and Challegnes in Solid-State Lighting" - All about LEDs. Not very interesting. A lot more semiconductor and electricity stuff.

4: "What's Exciting about Excitonics?" - This one seemed pretty cool, although I understand any of it really. It was about these things called excitons, which I guess are energy carriers of some sort? 

5: "Nano-structured Materials for Next Generation Fuel Cells" - This one wasn't terribly interesting, but I liked the speaker. However, he mostly just talked about how his group tried this and they got some unexpected results and it was cool and all but not useful so they tried this instead but then they got these unexpected results which were also cool but not useful. 

6: "The "Materials Genome" Project at MIT: Accelerated and Large-Scale Materials Discovery in the Energy Field" - This talk was fantastic. This guy is heading a group at MIT that is trying to computationally characterize and predict the properties for as many materials as they can (generally single-crystal crystalline materials of various compositions). The things they can do and have found are amazing. I think that this sort of sorting and computational prediction of the structure and properties of materials will become a lot bigger in the future, especially when computational power increases. 

7: "A123systems Li-ion batteries: from Nanotech to Reality" - This talk was pretty good, all about how this MIT spin-off company, A123 Systems, grew and became successful. They make lithium ion batteries. I find I liked the part of the presentation about the company and the entrepreneurship better than the information about batteries, as again, it's a lot of electronics related materials science.

8: "Creating and Funding Startups: A Venture Capital Perspective" - This talk was given by a venture capitalist all about what venture capitalism is, how it works, what they look for, etc. Very interesting.

After the talks was a poster session and a dinner, both of which I did not attend as I needed to get home and get a lot of work done. The talks that were interesting, I really enjoyed, and I'm very glad I went. 

Flamecutting and Grinding!

I learned two exciting new skills in my welding class yesterday, flamecutting and grinding. 

Flamecutting is certainly interesting. At times a bit more scary than fun. Basically, you have a nozzle with 9 holes, eight on the outside and one in the center. The outer 8 are for preheating, and the center one is for the actually cutting. The center hole is only used when you depress a lever on the side of the nozzle which I believe completely opens up the path for oxygen, which saturates the flame with oxygen making it very hot but also making it such that it will oxidize the steel. With flamecutting, however, this is not a worry because you are removing all of the steel that contacts the oxidizing flame.

The removing part is where it gets exciting. After preheating the steel up to about a yellow hot, you depress the lever and the flamecutting flame comes out and it is hot enough to instantly melt the steel, and the pressure from the gas from the nozzle shoots the melted metal away in a shower of sparks. Where do these sparks go? Why, directly away from the nozzle, of course. It's because of this I've learned to always try to flamecut away from yourself. Also I've learned to always have your pants over your boots, to avoid having hot pieces of metal fall into your boots and sit their for a while burning you.

It gets better, though.  Sometimes you have what's called a blowback, where instead of going away from you, pushed by the gases of the nozzle, the melted metal explodes outwards in all directions, and often makes an extremely loud and sudden popping noise. My guess is that this is caused by a pocket of air in the metal that, when heated up to quickly, explodes, causing the metal to behave much like several thousand degree hot liquid popcorn. This happens most of the time if you try to flamecut over an area that has already been cut. This is a tempting thing to do, as occasionally, if the part of the metal that was just cut stays too hot, the steel will fuse back together. 

And, just to add to all this, it's really hard to keep yourself steady if, like me, you're naturally a shaky or trembling person. This causes all your cuts to turn up looking like tiny zig-zags.

But, thankfully, this is why we have grinding tools. After having done a good bit of flamecutting, we were introduced to the 4 and a half inch grinders. These are somewhat crazy power tools that you plug into the wall, and when you turn it on, it will spin a 4.5 in. diameter disk really fast, fast enough to create a nice breeze, which you then put up against steel. What happens then is that some amount of steel is converted into a 15-foot jet of sparks. Yes, 15 feet, and, Yes, a jet. And these aren't all harmless little sparks, several of the things that shoot off the grinder are decent sized particles of hot steel. Luckily, most of the time, this just is facing away from you, though, depending on the side of the grinder you use, it can be facing you, and there are always little bits that get whipped around and towards you. The little devils get everywhere too. They've been known to light clothing on fire, light paper nearby on fire, and even bounce their way under your safety glasses and into your eye. Again, I try to avoid sending the stream in my direction.

This grinding, however, is extremely useful. When flamecutting, you'll often accumulate little beads of melted metal that are blown onto the sides of the steel. These little beads are no longer steel but are rather, because of the oxidizing flame I mentioned earlier, slag. The grinder is great for getting them off. The grinder also can smooth down the rough edges that all your trembling makes while flamecutting. Even more, the grinder can polish the metal and expose bright shiny bits under the black oxide coating, making the steel look a lot nicer. 

I think I can look forward to a lot of grinding in my future. 

Visit to the SEM

Last Thursday my boss took me on a trip to a scanning electron microscope nearby that we had rented some time with. He wanted to check some carbon residue for carbon nanotubes, and to examine the epitaxy of a certain grown sample.

First, we looked at the carbon residue. It looked like soot, and under the SEM it looked very disorganized and splotchy. However, we did see some carbon nanotubes. They looked like white strings in the SEM. There were not as many of them as my boss had hoped, but it was still cool for me to see what a carbon nanotube looks like under and SEM.

The next sample was ever cooler. First we got a look at some crystals. We wanted to see whether they were arranged epitaxially, which, unfortunately, they were not. It was still cool to see the crystals up close. When we zoomed in further though, past the large crystals and into about a 100 nm scale, we saw odd shapes that looked almost like olives. This was really cool because we have no idea what they are, but we believe they may be some odd arrangement of carbon. Hopefully we will figure out soon what it was we saw, it could be some exciting discovery!

Physics!

I'm finally getting to the calculus in physics, too! Yesterday I watched the lecture on pendulums, springs, and simple harmonic oscillation, (the one where Walter Lewin rides a pendulum across the room to show that its period is independent from mass) and today I watched the lecture about work and energy.

The SHO lecture has a little bit of calculus, mostly pretty simple and used to manipulate terms to get equations. The equations I had all seen before, last year in honors physics. However then we had just been given them, with little to no explanation of where they came from. Now that I've seen the math, I can understand the concept and reasoning behind the equations.

With work and energy calculus was deeply involved, using integrals and some manipulations to derive the equations we had again been given without explanation last year. This was then taken further when the calculus was used to understand work, energy, and gravity in three dimensions, something that had not been touched upon last year. 

This is the physics that I really enjoy. 

Calculus!

Last night was the fourth class of the Multivariable Calculus class I am taking at Harvard Extension, and we're finally doing calculus!

Pretty much everything up until now has been vectors, geometry, and parameterization, all necessary to learn pretty well before we actually got to the calculus, but to me it is less interesting and less fun. Last night though we got to partial derivatives, and velocity and acceleration vectors. 

Beauty.

Welding Class 2

Last night was my second welding class. Last class was all safety and a tour of the facilities, but this class we actually got to weld! And it was so much fun!

First we cut ourselves a bunch of pieces of steel. They were shaped like isosceles right triangles without the hypotenuse. Then we watched the instructor demonstrate the welding, and then we ourselves did it. It's not a short process, and a steady hand and patience are a huge help, but it's still a lot of fun! After most people had done their first weld, the instructor proceeded to show us to weld using a filler wire, which is a copper coated steel wire (The copper is used to protect the steel from oxidation. It burns away as soon as you heat it up in the flame. If the steel wire oxidizes it can weaken the weld) that you use to fill in gaps in the weld if the two pieces of steel are too far from each other, which happens since we're not always welding straight edges or perfectly cut steel.

I think that this class will absolutely be worth all the difficulty of getting into Boston every Tuesday after a cross country meet and not getting home until after 10.

Knifemaking

I took a class this weekend at Prospect Hill Forge in Waltham called "Nothing but Knives."

It consisted of three three-hour sessions. The first was a practice knife where we used mild steel (steel with about .16-.29% carbon) and the instructor taught us all the parts to making the knife. This was mostly review for me since I had previously taken the Simple Knives class there which was essentially the same thing.

The second session we made the real knife, using high carbon steel (about .30-1.70%. What we used was probably around .8-.9%) which is much harder than mild steel. It heats differently and fights back more when being smithed. 

The most interesting part, however, was after we had finished hammering the blade, and we annealed it. The instructor had a basic understanding of the metallurgy behind much of this process, and so he told us about it. Some of it I knew already, but some was new. For annealing, we heated the blade up to the point where the whole thing was hot enough to change from a Base Centered Cubic crystal structure to a Face Centered Cubic structure, called austenite. At this point the steel also ceases to be magnetic. I don't know why, though I sure would like to. After we have heated the blade to this temperature we placed it into an ash bed and left it to cool overnight. The slow cooling allows the steel to form large grains, making it very soft.

In the third session we came in and removed our knives from the ashes. We wanted them soft so that we could grind and file them easily. So we proceeded to grind and file for quite a while. This is mostly what makes the blade, since you can't get it sharp enough to cut anything with a hammer. After lots and lots of grinding, when we have a decently sharp blade, we begin the tempering process. This starts with again heating the blade up to an austenite temperature, and then cooling it rapidly in a vat of oil. Not only does this make it very hard and brittle from the rapid cooling, but gives it a nice oil finish.

After this comes the main tempering. A really hard brittle knife isn't so good, since it can be brittle enough that dropping it on the floor might shatter it. Also it would be really really hard to sharpen. So we took large metal clamps, heated them really hot, and then held them against the back part of the blade. 

At this point our instructor explained to us tempering colors. Steel will, starting at about 300 degrees, start showing colors. It starts with a light straw color, goes to bronze, then brown, then purple, then deep blue, then a bright teal color. It's pretty dramatic. His theory as to why this occurs is that a very very small oxide layer forms, small enough to be transparent, but still diffract the light, creating the colors. He's not sure about this, though, so it would be a cool thing to check. This is useful because it can tell us what temperature the blade is at. We hold the hot clamp on until the blade becomes bronze. We then quench it very quickly. The purpose of this is to leave the blade hard enough to hold and edge but soft enough to sharpen well and not break off. After the tempering comes some final sharpening, and then you have a finished knife!

The class was great, and lots of fun, especially since I learned not just how to make a knife, but much of the materials science behind it!

Below is a picture of the knife I made:

Vectors, vectors, vectors.

Had my third calculus class today. Still learning about vectors. Even though they don't excite me as much as calc does, they're really cool, useful, and powerful. I'm amazed at how much simpler they make expressing fuctions in two or more dimensions, or how they can make geometric proofs that took a page in ninth grade simple. 

What I wonder most, though, is why I've had so little exposure to them. In precalc we did a unit on them, but it was really no different than what you might do with lines in analytical geometry. there were no dot products or cross products. Then in physics, we learn a little more about vectors, but when it comes to dot products and cross products we are just told to plug values into some equation that magically works, with no explanation as to why. 

Yet, they are so simple. You can begin learning them in middle school, and all it takes to really fully grasp them is a deeper understanding of trigonometry, something students get their sophomore year. It's like not teaching concepts like radians or limits until 10th or 11th grade, when kids would internalize them and understand them much better having been taught them from childhood.

On Playing With Data

Recently at work I was put in the position of having some data, not much but enough to try to make some graphs, and needing to use it to understand what was going on.

More specifically, I had some dates and the mass of a thing from which we were trying to etch graphite. I wanted to find a way to express the rate of this etch both visually and comparably.

In the end, I didn't exactly reach these goals, but I did learn plenty about Playing With Data, and playing is really what it is!

In all my labs in highschool, you'd do some experiment, take some data, and then they'd have some lab questions or analysis where you'd be gently guided into seeing empirically the equations that you learned the day before. This is nice and all if you tend not to believe the teacher or textbook and you need concrete proof, or if you had a hard time internalizing and understanding the applicability of what you learned, or if you were just really interested (an interest that often went away after doing these labs."

This was quite different. I hadn't been taught the day before what was supposed to be going on (no one really knows), I hadn't learned the equations that the data should fit, and I didn't have some nice numbered questions that brought me gently to the main conclusion or point of the lab.

So I played. I fiddled around with and manipulated the data. I made tons of different graphs, and tons of different best fit lines or functions. 

The most important thing I learned, is that data without visual representation is largely meaningless and is not understandable. When you have just a list of x and y coordinates, it is very very rare that you can glance at them and go, "oh yeah, that clearly indicates this!" However, in a graphical representation of a data, one that's well done and clear, this can be done easily.

The creation of these graphs and the manipulation of this data also let me know another good lesson: more data is better. I was working with a very small amount of data, almost the minimum I could draw any reasonable conclusion from, and while I did have enough to draw such conclusions for my own purposes, it made it much harder and much less reliable. The more data you have, the easier it is to see trends and patterns, and the more exact your mathematical understanding of these will be.

Speaking of mathematics, I learned that it's very helpful to approach data from an analytical and mathematical way so as to gain and understanding of what you should do with the data. In this case we thought that the masses should change exponentially, that is Mass  = Ae^(kt), which would make sense since we assume that the longer it goes, the less graphite there is to etch, and so the rate slows.  This would indicate that if you took the natural log of the masses and graphed it against time, the relation should be linear. This we saw seemed to be true. With further data and investigation into this, we may be able to figure out a way to compare or standardize the etching rate, however I suspect that to do this we would need to look into the role of surface area on the rate.

And finally, documentation is key! in our digital world, no information need be delete (thanks, google) and everything is easily recorded and saved. So record and save it! I kept most of the graphs I made, even if they didn't make any sense, and I keep many of the pictures, even though they don't give any information towards figuring out the rate. All of it could be useful later on.

Work - Graphite etches and diamond-like hydrocarbons

Work today was good.

First off, things are working. I'm currently doing an electrochemical etch of a big thing covered in graphite, and I'm using weighing and pictures to attempt to determine the rate of the etch. So far, it has been pretty successful. Once I get more data points, I'll figure out some way to make the data useful so that it can be compared to further tests, with some variables. My boss suggested normalizing the data by getting percents of weight lost, which is probably what I'll end up doing. This is the first time I've really gotten to work interestingly with data, and to try to figure out on my own what to do with it and how to interpret it. In all the labs in high school, they make you take data and then tell you exactly what to do with it, and you've probably already learned what it means anyways. In this case, I don't really know what it means or how it relates to the variables. Very exciting. I think it would make a great science fair project, if that was what I was going to use it for.

Next interesting event was that I spent a bunch of time talking with my boss about the mechanism for the etch. This is something that no one knows, and that has mystified us from the beginning. If we knew the mechanism, we would know better how to improve the rate of the etch! Our current theories are as follows:

1: Some sort of reactive element or ion (OH-? H+?) is being created in the water and reacts with the graphite in some way, possibly to create CO or carbon dioxide. The problem with this is that most of the etched graphite seems to end up floating as macro-sized particles in the water, indicating that they've fallen off for some reason, which seems against the reaction to form gas unless this reaction likes to occur in crevasses underneath the graphite, taking away a layer and knocking everything above it off. 

2: The conductive graphite in the water creates a short that leads to a potential buildup on either end of the graphite, which causes the breakdown of water and possibly some sort of reaction to occur? This on is fuzzy, but it makes sense that this sort of potential buildup would occur.

3: This idea is weird, and seemed to be suggested in one of the papers I read. They seemed to think that the passage of current through the graphite may through random interactions (kind of like london dispersion, I guess) cause carbon atoms to momentarily become polar enough to be dissolved into the water. Again, if this were to happen, no visible graphite would be floating around in the water, unless it either ate below them or the graphite, after dissolving off the main structure, would fall out of solution and create visible particles.

With each of these potential mechanisms come potential ways to increase the rate:

1: Figure out how to create more of this ion, possibly with more current. Also, try to allow more of this to reach the surface of the graphite and avoid buildup of a layer around the graphite, either through ultrasonic agitation of the water or mixing. 

2: Use the purest least conductive water possible to make the potential difference across the graphite greater. Again possibly agitate the water to prevent the buildup of a layer.

3: More current. Possibly adding a surfactant (which the paper says they did, and that is slightly improved some of their performance)

Apart from this, my boss now wants me to find information about Diamond-like hydrocarbons, and the atomic hydrogen density of various types. So far, I've had little success in this, but I've not spent enough time.

As always, more to do!

Multivariable Calc

Had my second lecture of multivariable calc last night. It was more interesting than the first, though it was still all vector stuff. Dot product and cross product mostly.

The first homework wasn't particularly hard. The last question though had to you do a proof with vectors. It made me realize just how powerful they are. I'm still looking forward to getting to the real calculus, though. 

Physics

I ended up watching two physics lectures today, starting one between school and work, and then finishing it and another after getting home from practice.

The first was on 3d Kinetics, and free fall reference frames. It was pretty much all stuff I had encountered in honors physics last year, but Prof. Lewin never fails to make it interesting and fun to watch and learn about.

The second lecture was on circular motion. Again, it was mostly stuff I'd encountered before, though taught slightly differently. Also, as always, very entertaining.

I'm pretty happy so far with the rate I've been going through these. I've gone through 5 lectures in one week. If that rate keeps up, I could finish by November or December. However, I expect that once it gets harder and into newer material, I will go more slowly. We'll see!

Work - Ion implantation, Graphite Etching, and Ultrasonic Cleaning

Work was good today. Didn't do anything with the machines, rather some stuff with the graphite etch and a lot of talking with my boss about my various projects, where we are, what the ultimate goals are, and what the plan is. Very exciting, as it looks as if the work I've been doing, which has been working, could be really important and useful.

First off, we talked to a man named Jim Butler, whom Roy says is probably the most knowledgeable guy in the field. He told us a lot of info about ion implantation, in which basically ions are smashed into diamond at really high energies, and they end up going through a certain amount of diamond without doing any harm, but after they lose enough energy they start to bounce around and cause the diamond to amorphize. This creates and amorphous layer. I'm going to have to look into costs, and method, and companies, so more on that later.

Secondly, the graphite etch has been working really well. It's been going a lot faster than we though. We're going to start seeing if there's a detectable weight change, and figure out a rate, and see if that rate can be improved.

At work, we have a machine that uses ultrasonic waves to clean things. Basically, you put a liquid in a beaker and then the metal thing into the liquid and it shakes at such a high frequency that it shakes loose particles in the liquid. Problem is, ultrasonic as it is, it actually makes a terrible noise.

Interestingly enough, however, the noise changes drastically with different liquids. With ethanol, it's relatively quiet. With water, however, it makes a huge screeching noise, and you fear that the beaker may shatter (it doesn't, though. It just sounds like it). I wonder what causes this difference? 

So, as always, lots to do!

Humanities - History and Literature

Today was the first real class of humanities. We had history and literature. Mostly the classes were a review of the summer reading for the tests on Friday.

In History, we discussed some of the themes of King Leopold's Ghost, instances of them in the novels, and their relation to some quotes from Machiavelli and a couple other sources. I may write more specific things when I actually review for the test.

In Literature, we discussed themes and metaphors in the book. I didn't agree with much of what the teacher said about the book being entirely a metaphor. Since Conrad did actually travel up the Congo, and it was a huge issue at the time, I don't think the book was intended to be entirely disassociated from its setting. However, I do believe a lot of the things about the discovery of the emptiness at the core of societal morality. This, though, I think is deeply entwined with what was actually going on in the Congo, and Conrad's actual experiences, and the actual events of the book.

Tomorrow is the Art and Music review.

Important Lessons in Science

Work today was interesting.

I was had to end and set up a new run mostly on my own. This didn't go very well. There are a lot of steps to remember, and I've only seen it done twice and never done it fully by myself before, so I forgot a bunch of things. Also, I did a bunch of things wrong, which brings us to Important Science Lesson Number One.

Lesson Number One: When trying to see something up close, bring your face to the object, not the object to your face.

Why? Well, when you bring the object to your face, it is now over your lap or the ground, instead of the nice, brightly colored table. This means that when you drop said object or parts of said object or things that may be not so solidly glued to said object, they fall onto the floor, which brings us to Important Science Lesson Number Two.

Important Science Lesson Number Two: Don't drop carbon objects onto carbon colored rugs.

The rug where I work varies in color from dark grey to light grey. Carbon, whether graphite or diamond, varies from black, to dark grey, to a shiny grey. Thus, finding on this rug tiny pieces of carbon, like a piece of pencil graphite or in this case, four square millimeters of diamond, is extremely difficult. I have spent no small amount of time on my hands and knees today and on past days.

Now, after all this trouble, you've got everything set up. You put it all together, the machine starts running, it's time for you to twist some knob to move things into place. This is where Important Science Lesson Number Three comes into play.

Important Science Lesson Number Three: Know which direction is the correct direction to twist the knobs on scientific instruments.

So, after that run is aborted, we go through the whole process again, all the steps in all the right order and, oops! Forgot to unplug the fragile 800 dollar cable!

Important Science Lesson Number Four: Don't break expensive machinery.

Fortunately, nothing was broken. My boss did spend half an hour rearranging things though, such that there's much less chance of said fragile 800 dollar cable breaking. Close one.

So, why all of these mistakes? Why today? Well, a good amount of it can probably be attributed to my not listening to Important Science Lesson Number Five:

Important Science Lesson Number Five: Don't do science while extremely hungry. Your constant thoughts about when you're going to get to eat are distracting, and the general hunger corrodes your attentiveness and thought.

So what's the result of this? Tomorrow, I'm packing lunch!

Physics: First Day

Today was my first full regular day, which includes the first day of my study of 8.01 through MIT's Open Courseware.

It went pretty well. Did some exercises, watched a lecture. Since it's the very beginning, it's only up to 1D kinematics, so it's mostly review. I like the style of the textbook though; the problems are actually pretty interesting. 

The lectures are given by the somewhat famous Prof. Walter Lewin. He's known for his exciting in-class demonstrations. In the very first lecture, when talking about measurements and accuracies, he gets a kid to come onstage and be measured lying down and standing up to prove that you're an inch taller lying down than standing up. 

The most important thing to come ouf of this first day, however, is assurance that it works. That I'll have time each day to devote to this, and so I look forward to learning physics!

Work

Work. This is to me the single best facet of my learning this year, and it's only possible because of my non-traditional schooling. And I sure do learn a lot. Today, for instance:

1. Working with a small company is really cool and really educational. A lot of what we're doing right now is talking to other, much larger companies, and trying to market our products. This is a long process, because even if someone is interested in what we have, there's a lot of waiting and exchanging emails involved before anything happens. They need to find out what we can do, how much it will cost, or if they really want or can use it. On our end, we have to figure out what information to reveal, what prices to put on things, how to get them interested, what they actually want, and so on. We need to try and figure out how they'll react to certain ideas and how we can get them interested and paying. And even when they are willing to do something with us, it always starts with just a test, which hopefully we pay for. We haven't gotten to that stage with anyone yet, but it seems possible.

2. I read some about various ways to cut diamond today. Jewelers use diamond saws. We don't. For anything, we usually user a laser saw. How can a laser cut diamond? Well, what it does is that in the place it hits the diamond, it converts that area into graphite, which is then evaporated off by a second pass of the laser. It's a sawing motion, where the first pass does the graphitization, and the second pass removes the graphite. This and graphite mills are the standard. My boss, however, wanted me to look into abrasive water jetting as a method of cutting diamond. If you're not familiar with it, what abrasive water jetting does is that it accelerates water up to extremely high speeds and pressures, and then mixes it with an abrasive media. For hard materials like diamond, this would be Aluminum Oxide, Silicon Carbide, or diamond. Then, this mixture is propelled out through a nozzle and onto the thing being cut. While this method is not generally used to cut diamond, I found a recent study (early 2009) investigating it's usefulness for this. Apparently, it works. Not surprisingly, speed depends on the abrasive media, with Alumina being the slowest and diamond the fastest. What surprised me, however, was that the paper claimed that rates were comparable to those obtained by Electrical Discharge Machining, which means that it could become a viable method in the future. Who knows, maybe our company will pioneer its use?

And that's about it. Different methods of machining diamond are really interesting, and I could go on more. If you want to read about them, I suggest looking up Electrical Discharge Machining on wikipedia. You can read the abstract for the paper I found Here.

First Day of School

For my own organizational reasons, I'm going to make separate blog posts for separate educational facets, and each one will have a single label. This may result in multiple posts a day, but as I said, this is a selfish blog.

This one is about the first day of school, which was today.

What I learned: Not much. First day of school is organizational stuff (we spent an hour in home room). I do know more about my humanities class, though, like that we have Marques instead of Maloney for history. Interesting assortment of people, too. 

Yeah, not much to report on here.

First Post

This is a selfish blog.

Its purpose is not to proclaim my thoughts to the world, or to create a site where people can read what I write and learn, but rather it is a way for me to take this year's scattered manner of learning and focus it. A sort of log or journal of learning.

Why is it necessary? Well, instead of spending my senior year at Winchester High School taking classes like the thousand other kids in my school or the millions of teens in the country, I decided that I would try to do more. I decided that I would take a little more control of my learning in hopes that doing so would allow me more opportunity to learn, often in ways or in subjects my school doesn't offer. 

I will now list the elements that make up my education for the following year:

1. I am taking the humanities class at Winchester High School. This is a combined English, History, art, and music class. I am told that it's a great and challenging class, and so I am looking forward to it.

2. I am taking math classes at Harvard Extension. In the fall, I am taking Multivariable Calculus, Math E-21a, and in the spring I hope to take Linear Algebra, Math E-21b.

3. I am taking physics through MIT's Open Courseware. http://ocw.mit.edu/OcwWeb/Physics/8-01Physics-IFall1999/CourseHome/ If I get through 8.01, I will continue on to 8.02 and 8.03. The lectures are by the renowned MIT physics teacher, Walter Lewin.

4. I am taking a welding class at Mass Art. I enjoy metal working, and I think that this complements the occasional blacksmithing classes I take at Prospect Hill.

5. And to me the single most important of these, I have a job. I work for an innovative start-up company that creates CVD diamond for industrial applications. I work part-time. I started middle of last July, and because of my non-traditional schooling, I can continue to work during the school year. I've learned a lot of practical and hands-on lessons about science and run small businesses from this. Specific things will be covered in this blog.

6. While this is not definite, I am hoping to keep up my study in Spanish in a similar manner to how I learned English. I intend to find young adult science fiction and short stories in Spanish, and read them, and learn words and grammar as I encounter it.

At the same time as I do all of this, I am keeping up an active role as captain of Cross country and track, a role as leader of clubs like the Juggling and Improv club, and as a participant in the math team, Spanish club, and GSA. 


And tomorrow is the first day of school, though it won't be until the day after that we see if a regular day is going to work out well.

Busy! Exactly as I like it.